- Post author:admin
- Post published:September 8, 2022
- Post category:Scorpion Construction LLC Blog
Key Takeaways:
- Sealcoating involves applying a protective shield to your asphalt that helps to prevent damage from water, sun, and debris.
- Asphalt sealcoating should be done every two to three years or as needed to maintain its effectiveness.
- The best time to seal coat your driveway is in the spring or fall when the weather is milder.
- It’s the most cost-effective way to maintain your pavement.
- Choosing a reputable contractor is absolutely essential!
If you’re a Florida resident, you know our state is notorious for its hot and humid weather. This weather can take a toll on the asphalt on your driveway or parking lot, leading to cracks, chips, and other damage. Fortunately, sealcoating can help protect your driveway from the elements and increase its lifespan.
This blog post will discuss why driveway sealcoating is important and how long you should wait before getting your next sealcoating service!
What Is Asphalt Sealcoating & How Does It Benefit Your Pavement?
Many people are familiar with the process of driveway sealcoating, but they may not know exactly what it is or what it does. Sealcoating is simply the process of applying a protective coating to asphalt pavement. This coating helps to fill in cracks and repair damage, protecting the pavement from further wear and tear.
In addition, sealcoating helps to prevent oxidation and weathering, keeping the pavement looking fresh and new for years to come. It doesn’t only help to improve the appearance of your driveway, but it also helps to prolong its life.
For these reasons, asphalt sealcoating is essential for any pavement maintenance plan.
There are many more reasons you should get your driveway or parking lot seal coated– it’s an investment that will pay for itself many times over.
The Benefits of Driveway Sealcoating: How Does It Protect Your Pavement?
Like your skin, your pavement needs extra protection from the elements to stay healthy and function. That’s where sealcoating comes in. Applying a layer of sealant to your pavement can help prevent weather damage, extend its lifespan & keep it looking great for years!
Sealcoating works by creating a barrier between your pavement and the elements. This barrier helps to protect your pavement from the sun’s ultraviolet rays, as well as from water damage and freeze-thaw cycles. As a result, sealcoating can help to prevent cracks, potholes, and other common forms of weather damage. In addition, by sealing the pavement’s existing surface, you can help to prevent future weathering and deterioration.
Sealcoating is an easy & affordable way to maintain your pavement. In most cases, a single sealant application will last for two to three years. So, if you’re looking for a way to protect your pavement and save money in the long run, sealcoating is the way to go.
When Should You Have Your Pavement Sealed – Spring, Summer, Fall, or Winter?
The best time to seal your pavement is in the spring or fall. The weather during these months is usually milder, so the sealant will have plenty of time to dry and cure properly.
Avoid sealcoating during the summer, when the hot sun can cause the sealant to prematurely crack and peel. And while you can technically seal your pavement in the winter, it’s not recommended.
Snow and ice will prevent the sealant from properly adhering to the surface of your pavement, which means that it won’t be as effective in protecting your pavement from the elements.
What Should You Do Before Having Your Pavement Sealed?
Before having your pavement sealed, you’ll have to do the following:
- Make sure that it’s clean and free of any debris or dirt. The best way to do this is to wash your pavement with a pressure washer. This will ensure that the sealant has a smooth surface to adhere to.
- You should also make sure to repair any cracks or potholes in your pavement before having it sealed. Otherwise, the sealant will simply fill in these imperfections and won’t do anything to improve the overall condition of your pavement.
How Much Does Sealcoating Cost, On Average, In Florida?
The average cost of asphalt sealcoating in Florida is $0.15 to $0.30 per square foot. This includes the cost of materials and labor. A typical driveway that is 1,000 square feet would cost between $150 and $300. Sealcoating is generally a pretty affordable way to improve the appearance and condition of your pavement.
How To Find a Reputable Contractor to Sealcoat Your Pavement?
1. Get Recommendations
Ask your friends, family, and neighbors if they have previously used a sealcoating contractor that they would recommend. This is a great way to get first-hand information about the quality of work and customer service.
2. Do Your Research
Once you have a few contractors in mind, do some research on them. Check out their website and read online reviews to understand what others have to say about their work.
3. Get Quotes
Now make a list of potential contractors, reach out to them and get quotes for the job. Make sure to ask about the cost of materials and labor so you can compare apples to apples.
4. Make Your Decision
After you’ve done your research and collected quotes, it’s time to make a decision. Choose the contractor that you feel is the best fit for your needs and budget.
Conclusion
Sealcoating is a crucial step in maintaining your asphalt pavement. It helps protect the pavement from the sun’s UV rays, oxidation, and water damage. It also extends the life of your pavement by several years. If you’re thinking about sealcoating your pavement, be sure to do your research and choose a reputable contractor to do the job.
If you’re having trouble finding a reputable sealcoating contractor in Florida, Scorpion Construction is here to make it easier for you!
At Scorpion Construction LLC, we offer sealcoating services at the best prices for residential and commercial properties in Sarasota, FL. We use only the highest quality materials. Our experienced professionals will ensure that your pavement looks great and lasts for years.
Learn more about our sealcoating services by contacting us, or get your free estimate now!
- Post author:admin
- Post published:August 22, 2022
- Post category:Scorpion Construction LLC Blog
Many people are unaware of the costly expenses of repairing damaged underground utilities. When these lines are damaged, getting them up and running can take time and money. Making even a small excavation can damage underground utilities, and the costs of repairs can be high.
This blog post will discuss hidden expenses you might not be aware of when repairing underground utilities. We’ll also provide tips to avoid damaging these critical infrastructure components.
1. The Legal Expenses
If the damage caused is severe, you might have to incur some legal expenses. These could be in the form of penalties, out-of-court settlements, or even a court trial if the case goes that far.
2. The Productivity Loss
Suppose the damaged utility happens to be electricity, water, or gas. In that case, it can lead to a loss in productivity for your business. This is because these utilities are required for the smooth functioning of most businesses. The loss suffered could be in terms of revenue, customers, or even employee morale.
3. The Environmental Cost
If the damage causes the spillage of hazardous materials, it could lead to an environmental cleanup cost. This is in addition to any fines that the authorities might levy.
4. The Insurance Cost
In most cases, the business owner will have to bear the cost of repairing the damage from their pocket. However, if you have insurance for your business, you might be able to claim some reimbursement. This comes at an additional cost in the form of increased premiums.
5. The Opportunity Cost
If the damage is so severe that it results in the closure of your business premises, you will lose revenue from sales. Similarly, if it has disrupted your supply chain, you might incur additional costs to source raw materials from alternative suppliers.
These hidden costs can add up and rattle your business finances. Therefore, it is essential to be aware of them and take steps to prevent such damage from happening in the first place.
You can do this by investing in underground utility mapping services. These services create a detailed map of your area’s underground utilities. This way, you can avoid damaging them while carrying out excavation work.
It’s best to contact a professional underground utility company if you plan to carry out any excavation work on your property. They are aware of all the nook & crannies, and you can avoid any costly surprises down the line.
So, are you looking for a construction company that can handle all your site development needs? Look no further than Scorpion Construction LLC serving St. Petersburg, FL. We’re fully insured, licensed, and bonded. We’re also up-to-date on all local, state, and federal regulations and guidelines. In short, we’re the complete package.
We’re experts in everything from excavating and grading to installing utilities and paving. Our team has highly skilled professionals who can handle any size underground utility project. So, we’re up to the task whether you need a small site developed or a large one.
- Post author:admin
- Post published:August 11, 2022
- Post category:Scorpion Construction LLC Blog
Have you ever seen a paving contractor spread sand over freshly installed asphalt? It may look strange, but there is a good reason for it. In this post, Scorpion Construction LLC will discuss the benefits of this practice and how it can help improve the lifespan of your asphalt pavement.
Asphalt Surface Formation
Asphalt is a mix of gravel, sand, and bitumen. When it is first installed, the asphalt is in a liquid state. Your paving contractor will use a large machine to spread the asphalt over the ground’s surface. Once the asphalt has been laid, it will begin to cool and harden.
As it cools, the asphalt will start to form a solid surface. However, this surface will be very porous and not very strong. The pores on the surface of the asphalt allow water to seep through. This can lead to serious problems if there is heavy rain or snowfall soon after the asphalt has been installed. The water can cause the pavement to crack and break apart.
Scattering Sand Over Newly Installed Asphalt Surface
The reason that contractors throw sand on newly installed asphalt is multifold.
1. Fills in the Voids in the Asphalt
First, the sand helps to fill voids or gaps in the asphalt. To prevent the new asphalt surface from water damage, paving contractors will often scatter sand over the surface. The sand helps fill the pores and creates a more robust, durable surface. It also provides traction for vehicles, especially in wet or icy conditions.
2. Provides a Protective Barrier
Second, the sand provides a protective barrier between the asphalt and vehicles. The sand also helps to absorb any impact from cars, which can help extend the lifespan of your asphalt pavement.
3. Increases Pavement Durability and Life Expectancy
It helps to increase the durability and life expectancy of the pavement and can prevent costly repairs down the road. So next time you see a paving contractor spreading sand, you’ll know it’s not just for show. It’s an essential part of the asphalt paving process.
4. Better Traction
Dusting sand over newly laid asphalt will significantly increase your car’s traction. It prevents slipping or sliding on wet pavement as the new surface has a better grip.
5. Enhances the Look of the Asphalt Surface
Last but not least, the sand enhances the asphalt surface’s aesthetics. It gives it an excellent, even finish, that is much more visually appealing than plain asphalt.
So, there you have it. The next time you see a paving contractor sanding newly installed asphalt, you’ll know there’s a good reason for it. It’s not just for show – it’s an essential part of the process that helps to ensure a long-lasting, durable pavement.
Ending Note
Scorpion Construction LLC serving Clearwater, FL, understands the importance of adequately preparing an asphalt pavement before laying down new asphalt. It is why we always throw sand over newly paved surfaces. The benefits of doing so are many and can help enhance the lifespan of your asphalt pavement. If you need a paving contractor, please don’t hesitate to contact us for a free estimate. Thanks for reading!
5 Types Of Asphalt Cracks And How To Repair Them
- Post author:admin
- Post published:August 1, 2022
- Post category:Scorpion Construction LLC Blog
Asphalt driveways are a common sight in suburban neighborhoods. Although asphalt lasts for many years with proper maintenance, eventually, all asphalt shows signs of wear and tear. This can manifest as cracks in the surface of the driveway. While some cracks are no big deal and can be fixed with a simple repair kit, others require more attention. This blog post discusses five asphalt crack types and how to fix them.
1) Fatigue Cracking
When excessive load and weight cause a road to deteriorate, it leads to asphalt cracking. The surface begins to form tiny fissures and then larger cracks as the asphalt weakens. This type of crack is often seen in areas that experience much traffic, such as highways.
2) Edge Cracking
Edge cracking occurs when there is no shoulder or curbs to protect the asphalt from vehicles driving off the road. The edge of the asphalt then becomes damaged and starts to crack. This type of asphalt crack is common on country roads and residential streets. Edge cracks resemble longitudinal cracks as they form a foot or two of each other.
3) Block Cracking
Block cracking looks like a series of small square cracks that are interconnected. Block cracks develop due to fatigue or repeated stress, such as heavy vehicles driving on the same path and significant temperature changes.
4) Transverse Cracking
Transverse asphalt cracks are the most common type of crack, and they run perpendicular to the road’s centerline. These cracks form due to traffic constantly driving over the same spot on the surface, causing it to deteriorate and crack under pressure.
5) Slippage Cracking
Slippage cracking is a type of asphalt crack that can occur when there is too much binder. This causes the asphalt to become too soft, especially in warm weather, and results in the pavement breaking or slipping. These cracks typically form at joints in the surface where there is weak support.
Asphalt Pavement Maintenance Tips
Implement the following tips to prevent crack formation:
- Routinely check your asphalt surface for any signs of cracking or deterioration.
- Fill any cracks you see as soon as possible to prevent them from spreading.
- Sealcoat your asphalt surface every 2 to 3 years to protect it from the elements and extend its lifespan.
- To keep it in good condition, perform regular maintenance on your surface, such as power sweeping and applying a fresh layer of asphalt.
By following these tips, you can help keep your surface in good condition and prevent the formation of cracks.
While you may be able to do some of the repairs yourself, it’s always best to hire a reliable professional. Scorpion Construction LLC offers quality asphalt patch and repair services in Tampa Bay, FL. We can help you identify what kind of crack is affecting your pavement and provide a solution that will extend the life of your asphalt surface. Contact us today for a free estimate.
- Post author:admin
- Post published:July 27, 2022
- Post category:Scorpion Construction LLC Blog
Have you ever noticed an alligator cracking in asphalt pavement and wondered what caused it? Alligator cracking, also known as fatigue cracking, is one of the most common types of asphalt pavement failure. This failure occurs when there is repeated traffic loading on a weak-base asphalt mixture. The combination of these factors causes the asphalt to crack and crumble, resulting in alligator cracks.
There are a few ways to repair alligator cracks in asphalt pavement.
The best way to repair alligator cracks is to prevent them from happening in the first place. However, suppose you already have alligator cracks. In that case, you can do a few things to mitigate the damage and extend the life of your asphalt pavement.
How to Prevent Alligator Cracks from Forming?
As discussed, alligator cracks are a result of overloading and weak subgrade. Therefore, the best way to prevent alligator cracks is by ensuring the asphalt mixture is strong enough to support the weight of traffic and by maintaining a solid subgrade.
There are some things you can do to ensure your asphalt mixture is firm enough:
- Use asphalt with a high binder content and add fibers to the mix.
- Use a gap-graded asphalt mix with a larger nominal maximum aggregate size.
To maintain a strong subgrade:
- Ensure proper drainage by grading the subgrade so water drains away from the asphalt pavement.
- Compact the subgrade before asphalt paving.
- Use a strong base course material on top of the subgrade.
Can You Repair Alligator Cracks Yourself?
Home and business owners sometimes try to repair alligator cracks using an asphalt crack filler. They may also try patching with cold or hot-mix asphalt. However, these methods are only temporary fixes that will not last.
Why?
- Asphalt crack filler is not designed to fill cracks that are more than a quarter-inch wide.
- Asphalt crack filler will not adhere to the sides of the crack, which means that it will quickly peel away.
- Asphalt crack filler is not flexible, so it can make the crack worse.
The best way to repair alligator cracks is to resurface the asphalt driveway. The process includes removing the top layer of asphalt and replacing it with a new layer. Resurfacing asphalt driveways is not a do-it-yourself job. You must hire a professional asphalt paving contractor for the job.
Should you Seal Alligator Cracks?
Seal coating is an essential part of asphalt maintenance. It protects the pavement from the sun’s UV rays, which can cause asphalt to become brittle and crack.
However, seal coating does not affect alligator cracks. It is because the cause of alligator cracks – dried and cracked asphalt – is below the surface. So, seal coating will not improve the appearance of alligator cracks or prevent them from spreading.
But, once you’ve repaired alligator cracks, you should seal coat the asphalt to protect it from further damage.
Can you Ignore Alligator Cracks for a While?
No, you can’t. Alligator cracks signify that your asphalt is deteriorating. If you ignore them, the asphalt will continue to degrade. The cracks will get bigger and more numerous, and eventually, you’ll have to replace your asphalt completely. Plus, why let the ugliness of fatigue cracking ruin the look of your asphalt when it’s so easy to repair alligator cracks?
Conclusion:
It’s always best to permanently repair alligator cracks as soon as possible. By doing so, you’ll save money in the long run, and you’ll also protect your asphalt from further damage.
Since you can’t DIY your way out of a terribly cracked pavement, Scorpion Construction LLC, serving St. Petersburg, FL, is here to assist. We have experience in asphalt crack filling and can restore your asphalt to its original condition.
- Post author:admin
- Post published:July 15, 2022
- Post category:Scorpion Construction LLC Blog
Many facility lot managers believe that parking lot striping is a simple process. Unfortunately, this is not always the case. Parking lot striping is essential to running a successful business; if it is done wrong, you could end up with many frustrated customers – not to mention an ADA violation.
Scorpion Construction LLC will discuss eight simple steps to help stripe your parking lot right the first time!
Simple Steps to Stripe Your Parking Lot
Parking lot striping is not always as simple as it seems. There are a few key things that you need to keep in mind to ensure that your parking lot is properly stripped. Here are eight simple steps to stripe your parking lot right the first time:
1. Plan Ahead
Before you stripe your parking lot, it is essential to take the time to plan. It means measuring the parking lot, creating a layout, and determining what type of paint or tape you need.
2. Choose the Right Paint
Regarding parking lot striping, not all paint is created equal. Make sure to choose a high-quality parking lot paint designed for asphalt surfaces.
3. Clean the Surface
For the paint or tape to adhere properly, it is essential to ensure that your parking lot’s surface is clean. It means sweeping away any dirt, debris, or oil that could prevent the paint from sticking.
4. Apply Primer
Once the surface is clean, you will need to apply a primer. It will help ensure that the paint or tape adheres and lasts long.
5. Create a Stencil
If you want to get creative with your parking lot striping, you can create a stencil. It makes it easy to paint parking space numbers, logos, or other designs.
6. Use a Roller to Paint or Tape
Apply the paint or tape to the parking lot when the primer is dry. A roller is the best tool for applying parking lot paint. It will give you a smooth, even finish that will last for years. Follow the manufacturer’s instructions vigilantly to achieve the best results.
7. Allow to Dry
Once the paint or tape is applied, allow it to dry completely before using the parking lot. This process can take several hours, so it is best to plan accordingly.
8. Enjoy Your New Parking Lot
Once the parking lot is dry, you can enjoy its new look! So, stripe your parking lot to improve its appearance and make it more functional for customers and employees.
These simple steps ensure that your parking lot will be striped appropriately and ready for use. With some planning, you can avoid costly mistakes and ensure that your parking lot looks great for years to come.
Ending Note
Parking lot striping is a detail-oriented task that can make or break your business. By following these ten simple steps, you can be sure to stripe your parking lot perfectly the first time and avoid frustrating customers.
If you have questions about this process or need help with your parking lot, don’t hesitate to contact Scorpion Construction LLC, serving Lakeland, FL, for a free estimate.
Thanks for reading!
- Post author:admin
- Post published:July 6, 2022
- Post category:Scorpion Construction LLC Blog
When your asphalt driveway or parking lot begins to show its age, it might be time for a repaving project. A professional paving contractor can help you weigh the pros and cons of different paving materials and designs to make the best decision for your property. If you’re thinking about repaving your asphalt surface, it’s essential to consider all the factors involved in the process. Every decision has its pros and cons, and making the right call for your specific needs is crucial.
Scorpion Construction LLC will discuss five essential factors when planning a repaving project: cost, durability, aesthetics, functionality, and environmental impact.
1. Cost
Of course, the cost is always a factor to consider when undertaking any home improvement project. The good news is that there are paving materials to suit a wide range of budgets. Asphalt and concrete are relatively affordable options, while brick and stone can be more expensive. No matter your budget, there is a paving material out there that will work for you. The project’s cost will depend on several factors, including the area’s size, the paving material you choose, and the paving contractor you hire. To get an accurate estimate of the cost of your repaving project, you should get quotes from multiple contractors.
2. Durability
Durability is another critical factor to check when repaving your driveway. You will want to select a durable material that will last many years.
3. Aesthetics
You will want to consider the aesthetics of your repaving project. It includes choosing a color and style that complements your home and property. With such a wide variety available, you are sure to find the perfect paving material for your home.
4. Functionality
You want a driveway that is not only going to look good but also function well. That’s why it’s essential to consider things like drainage and snow removal when choosing your paving material. If your area faces a lot of snowfall, you will want to select a material that is easy to shovel or plow.
5. Environmental Impact
When it comes to the environmental impact, you will also want to consider the manufacturing process of the paving material you select. Some paving materials contain harmful chemicals that can leach into the soil and groundwater. You may want to choose a paving material that is made from recycled stuff or that has been certified as environmentally friendly.
Ending Note
So, what’s the verdict? Are you ready to repave your asphalt surface? Scorpion Construction LLC serving Clearwater, FL, is here to help. As your paving contractor, we will consider all the factors involved in the process to help you decide what’s best for your needs. And we’ll also gladly give you a free estimate for your repaving project, so you can start planning immediately. Don’t wait any longer- connect with us today! Thanks for reading.
- Post author:admin
- Post published:June 21, 2022
- Post category:Scorpion Construction LLC Blog
Construction projects can be complex and time-consuming endeavors. That’s why it’s essential to start planning early and ensure all the details are in order. It’s always a good idea to start planning early in any construction project. By getting a head start, you can avoid many potential problems and ensure that the project goes as smoothly as possible. As a property owner, you may not often think about asphalt paving planning. But when you need to repave your driveway or install new utilities, it’s essential to plan to ensure the job is done right and avoid costly mistakes. Scorpion Construction LLC will discuss six incredible benefits of early planning in asphalt paving projects!
1. Save Time and Money
The most important benefit of early planning is that it allows you to save time and money. By starting the planning process early, you can ensure that all the details are in order before construction begins. It will save you time and money in the long run because you won’t have to make changes later down the road.
2. Plan Well for Potential Problems
Early planning allows you to choose the right asphalt contractor by getting multiple bids and references before hiring one. If you plan early, you can avoid many common problems with asphalt paving projects. For example, taking preventive measures for water runoffs and other external factors to your parking lot or driveway.
3. Schedule Project According to the Weather Conditions
Asphalt needs time to cure, so it’s essential to avoid hot, humid weather during and immediately after the paving process. Early planning lets you schedule your project for cooler months or early spring or fall.
4. Well Prepared Base
A well-prepared base is essential for the success of asphalt paving projects. Early planning includes removing any vegetation, loose dirt, or other debris from the area before beginning.
5. Compact the Asphalt
After the asphalt has been laid, it needs to be compacted using a heavy roller or plate compactor. Good planning ensures that the asphalt is adequately bonded to the base course.
6. Allow Time for Curing
Once the asphalt has been compacted, it needs time to cure and harden. It usually takes 24-48 hours but may take longer in cooler weather. It should be considered in the planning stage to ensure proper curing time before you end the project.
Ending Note
As you can see, there are many benefits to early planning in construction projects. By starting early and taking the time to plan every detail, you can avoid problems down the road and ensure a smooth and successful project. If you have any upcoming asphalt paving projects, get started on the planning process as soon as possible. And if you need help getting started, don’t hesitate to contact Scorpion Construction LLC serving St. Petersburg, FL. We would happily provide you with a free estimate so you can see just how affordable our services are. We have over 34 years of experience in asphalt paving and sealcoating, and we’re dedicated to providing our customers with top-quality artistry at competitive prices.
- Post author:admin
- Post published:June 13, 2022
- Post category:Scorpion Construction LLC Blog
We all know that hot weather can be brutal, but you may not realize that excessive heat can also take a toll on asphalt and concrete pavement. Both these materials are vulnerable to the damaging effects of extreme heat.
In this blog post, Scorpion Construction LLC will look at the impacts of excessive heat on asphalt and concrete pavement and provide some tips for protecting your pavement from the heat.
How the Sun Can Damage Your Pavement:
It Can Become Brittle and Cracked:
The sun’s ultraviolet (UV) rays cause damage to the surface of asphalt pavement, causing it to become brittle and cracked. This type of damage is most common in areas that receive a lot of direct sunlight, such as parking lots.
It Can Cause the Surface to Soften and Become Sticky:
Asphalt pavement can also suffer from what’s known as “rutting.” It occurs when the surface of the asphalt softens and becomes sticky due to the heat, causing tire marks to be left behind.
It Can Cause Expansion Joints to fail:
Concrete is also susceptible to damage from heat. One of the most common problems is that expansion joints can fail, leading to cracks in the concrete.
Tips for Protecting Your Pavement from the Heat:
Use Seal Coat:
An ideal way to protect asphalt pavement from the heat is to use a seal coat. A seal coat helps protect the surface of the asphalt from the sun’s UV rays and prevents moisture from penetrating the pavement.
Use Concrete Sealer:
Another way to protect the concrete pavement from excessive heat is to use a concrete sealer. A concrete sealer helps protect the surface of the concrete from the sun’s UV rays and prevents moisture from penetrating the pavement.
Keep Your Pavement Clean:
It’s essential to keep your pavement clean during the summer months. Regularly sweeping or power washing your pavement will help remove dirt, debris, and other contaminants that can cause damage to the pavement.
Monitor Your Pavement:
Be sure to monitor your pavement for any signs of damage or distress. If you notice any cracks, potholes, or other problems, be sure to have them repaired as soon as possible to prevent further damage.
How to Repair Damaged Asphalt and Concrete Pavement?
Asphalt Patching:
It is a standard repair method for damaged asphalt pavement. Asphalt patching involves applying a new layer of asphalt over the damaged area.
Concrete Repair:
Concrete repairs can be done in several ways, depending on the severity of the damage. For minor cracks and deterioration, concrete sealers or epoxy injections can be used. For more severe damage, concrete replacement may be necessary.
Infrared Repair:
Infrared repair is a newer pavement repair method that uses infrared technology to heat the damaged area of asphalt pavement. This heat softens the asphalt, allowing it to be raked and compacted into a new surface.
While freezing weather can cause some damage to asphalt and concrete pavement, it is the excessive heat that causes the most problems. The high temperatures cause the pavement to expand and contract, which leads to cracking, potholes, and other types of damage.
If there is excessive heat where you live, like Lakeland, FL, it’s important to protect your pavement. Scorpion Construction LLC offers various services designed to help you keep your pavement looking great all year long.
We provide free estimates, so contact us for more information or visit our service page.
- Post author:admin
- Post published:June 1, 2022
- Post category:Scorpion Construction LLC Blog
Have you ever seen a black, oily film on the asphalt driveway of a home or commercial property? If so, that film is most likely an accumulation of pollutants and oils that have seeped into the pavement over time. Left untreated, this film can lead to unsightly staining and even damage to the underlying asphalt. But fear not – proper asphalt sealcoating can help protect your driveway from these damages and keep it looking its best for years to come!
Keep reading this blog post by Scorpion Construction LLC for a closer look at some of the most common mistakes folks make with their asphalt sealcoating projects and tips on how to avoid them.
Asphalt Sealcoating Blunders to Avoid!
1. Applying the Sealer Too Thick
One of the most dreadful mistakes people make when it comes to asphalt sealcoating is applying the material too thick. Now, you might be thinking, “What’s wrong with putting on a little extra protection?” Well, for starters, too much sealer can actually end up cracking and peeling off in large pieces, leaving your asphalt susceptible to all sorts of damage. Not to mention, a thick layer of sealer will take forever to dry – meaning you will be stuck inside while the stench of fumes lingers.
The moral of the story is? When it comes to sealcoating, always err on caution and apply a thin, even layer.
2. Using the Wrong Sealer
Another sinful mistake people make is using the wrong type of sealer for their climate. There are two different sealers on the market – asphalt-based and coal tar-based. Asphalt-based sealers are designed for hot climates, while coal tar-based sealers work best in cold weather. If you use the wrong sealer, it won’t adhere properly to your asphalt and will start to peel off within a few short months.
3. Not Applying a Second Coat
If you want your sealcoating to last, you need to apply at least two coats. The first coat should be applied when the temperature is above 60 degrees Fahrenheit and there’s no chance of rain in the forecast. Once the first coat has dried, usually within 24 hours, you can apply the second coat.
4. Not Allowing the Sealer to Cure
After applying the sealer, it’s essential to let it cure properly. This means keeping traffic off the sealed surface for at least 24 hours, or longer if possible. If you don’t let the sealer cure, it won’t have a chance to set properly and will start to wear away quickly.
5. Applying the Sealer in Direct Sunlight
If you apply the sealer in direct sunlight, it will start to cure too quickly and will result in a poor bond between the sealer and the asphalt. This can cause the sealer to peel and flake off, leaving your asphalt unprotected.
6. Not Hiring a Professional
Lastly, one of the people’s biggest mistakes is not hiring a professional to do the job. Asphalt sealcoating is not a DIY project. It requires special tools, equipment, and training to do it properly. Hiring a professional paver will ensure that the job is done right and will last for years.
Here’s How Scorpions Can Help You!
Hiring a professional to handle your asphalt sealcoating needs is always the best decision. Here at Scorpion Construction LLC, we have the experience and training needed to get the job done quickly and efficiently. Looking for an asphalt paving company in Clearwater, FL? Contact us today to learn more about our services or schedule a free consultation.
We look forward to hearing from you soon!
Connect with us
- January 2024
- May 2023
- January 2023
- December 2022
- November 2022
- October 2022
- September 2022
- August 2022
- July 2022
- June 2022
- May 2022
- April 2022
- March 2022
- February 2022
- January 2022
- December 2021
- November 2021
- October 2021
- September 2021
- August 2021
- July 2021
- June 2021
- May 2021
- April 2021
- March 2021
- February 2021
- January 2021
- December 2020
- November 2020
- October 2020